Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar Flex® Ultraflex B - PVDF - ARKEMA

Material Data Center offers the following functions for Kynar Flex® Ultraflex B:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Kynar Flex® resins are fluorinated thermoplastic copolymers.

Kynar Ultraflex® resin is a semi-crystalline copolymer of vinylidene fluoride and hexafluoropropylene. This copolymer is a highly flexible material that can be melt processed using typical melt processing equipment or can be easily put in solution for solution coating process. It can be supplied in as pellets for melt processing or as crumb to facilitate dissolution.

This is the most flexible Kynar Flex® resin grade available.

Additional characteristics:
- High flexibility
- Toughness
- Weatherability
- Solution properties
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 80 МПа ISO 527
Напряжение в точке текучести 6.5 МПа ISO 527
Удлинение в точке текучести 20 % ISO 527
Номинальное удлинение при разрыве >50 % ISO 527
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 101 °C ISO 11357-1/-3
Температура изгиба под нагрузкой, 1.80 МПа 46 °C ISO 75-1/-2
Кислородный индекс 40 % ISO 4589-1/-2
Прочие свойстваЗначениеЕдиницаСтандарт
Водопоглощение 0.03 % Sim. to ISO 62
Плотность 1770 кг/м³ ISO 1183
Особые свойства и характеристики
Специальные характеристики
Сополимер
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.